Products - Min 40% OFF

Cardinal Cursive Alphabet Capital and Small Letter Writing Practice Books for Kids| Set of 3|Kindergarten Book for Kids Ages 3-7 YearsSheth Publishing House published "Cardinal Cursive Alphabet Letters" writing books series is specially designed for children to hone their handwriting skills. These books provide sufficient practice with gradual progression towards well-formed writing. This drill will help children get the right grip and desired muscle movements of the hand.Legal Disclaimer: Product images are for illustrative purposes only. Images/packaging/ labels may vary from time to time due to changes made by the manufacturer's manufacturing batch and location. Product ID:11064846

Cardinal Chun-Mun Balgeet Aur Kahaniya Books (Set of 3) Hindi Rhymes & Short Stories for Kids| Ages 3-6 YearsSheth Publishing House published "Cardinal Chun Mun Balgeet & Kahaniya". It's Hindi Rhymes and Stories book for Preschoolers. This series is an ideal educational aid to prepare little-learners for pre-school. These books have been carefully designed keeping in mind the needs of curious learners. In this book contains attractive rhymes & stories with them and encourage them to sing, dance, listen and understand the moral of stories.Legal Disclaimer: Product images are for illustrative purposes only. Images/packaging/ labels may vary from time to time due to changes made by the manufacturer's manufacturing batch and location. Product ID:11064845

Cardinal Alphabet Letter Writing Book (Set of 3)|Alphabet Capital & Small Letter writing & Practice Book| Kindergarten Book for Kids Ages 3-6 YearsSheth Publishing House published the "Cardinal Alphabet Letters" writing books, is an attractive writing book for children for both capital and small letters. Easy to trace and write capital and small alphabets. It is perfect for handwriting practice with red and blue lines to help with spacing and to form the alphabets in a neat, fluent and legible manner. These books adopt unique method for letter formation, supported by dotted lines and arrows indicating where to begin and how to form each letter including the height and length. It has activities to practice the basic strokes and movements of handwriting.Legal Disclaimer: Product images are for illustrative purposes only. Images/packaging/ labels may vary from time to time due to changes made by the manufacturer's manufacturing batch and location. Product ID:11064844

Cardinal ABC & Pattern Book Set (Set Of 2)| Alphabet Picture Book|General Knowledge Book|Pattern Writing Book| Combo Book for Kids| Ages 3-5 Years"Cardinal Books” series is high quality multi-coloured Pattern Writing book & Alphabet book displaying many matching objects for each alphabet & each Pattern. Also contains an illustration of standing lines, curved lines, slanting lines and other patterns, domestic, wild and water animals, birds, flowers, colours, vegetables, fruits, vehicles, different parts of bodies and different outdoor and indoor games etc. activities followed by for better understanding and a fun learning experience for the young ones.Legal Disclaimer: Product images are for illustrative purposes only. Images/packaging/ labels may vary from time to time due to changes made by the manufacturer's manufacturing batch and location. Product ID:11064843

Safe-O-Kid Unique High Density 2 Mtr Long U - Shaped 2 Edge Guard Strips - BrownMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480405

Safe-O-Kid Unique High Density 2 Mtr Long U - Shaped 2 Edge Guard Strips - BlackMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480404

Safe-O-Kid Corner Guardscushions, U Shaped, Large Size Extra Thick, BrownMaterial: Toxic Plastic Premium Corner Cushions, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high-impact collisions (does not rupture). Safe-O-Kid's special adhesive (do not come off easily yet do not leave stains/damage furniture/paint). Non-toxic, eco-friendly, odorless, dust-free, and does not become sticky with prolonged use even in extremely hot weather. Flame retardant/fire and water resistant. Easy to install and remove. Reusable. Vast array of color and design choices to blend with furniture and/or room theme. Flexible shapes and sizes to fit all furniture types and dimensions. How to use Clean the corner surface as well as Safe-o-Kid’s Corner Cushion’s inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double-sided 3M tape provided with the Corner Cushion. Apply the tape to all four inner surfaces of corner cushion Align the tape with the edges of the Corner Cushion. Remove the 3M backings from the four pieces of tape applied to the Corner Cushion’s inner surfaces. Carefully align so the Corner Cushion fits perfectly with the corner’s surface without leaving any space. Press tightly and hold Corner Cushion against the surface for at least one minute. To Remove: - Start removing Corner Cushion carefully from any of the edges. DO NOT use any chemicals/sharp tools. - Clean the surface with a wet cloth, etc. as suitable. Best suited for: Sharp edges made of glass, metal, wood including tables, chairs, beds, drawer u,nits,fish tanks, chests/cabinets, nightstands, and shelves. Sharp edges of fixed constructions like stairs, low ceilings, plumbing fittings. Ideal places: home, schools, daycares, preschools, hospitals, assisted living facilities, senior housing, work areas, offices, museums, restaurants & hotels.Legal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480400

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 1 Edge Guard With 4 Corner Cushions - GreenMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480399

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 1 Edge Guard With 4 Corner Cushions - GreyMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480398

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 1 Edge Guard With 4 Corner Cushions - YellowMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480397

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 1 Edge Guard With 4 Corner Cushions - BlackMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480396

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 1 Edge Guard With 4 Corner Cushions BrownMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480393

Safe-O-Kid High Density Edge Guards - 5 Mtr (Brown) For Kids ProtectionMaterial: Rubber Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480383

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Large 2 Edge Guard Strips - D.BrownMaterial: Foam Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480381

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long 2 Medium Edge Guards With 8 Corner Cushions WhiteMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480380

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Medium Edge Guards With 8 Corner Cushions -  BrownMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 

Safe-O-Kid Unique High Density 2 Mtr Long U Shaped Edge Guards With 8 Corner Cushions - GreyMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480378

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long 2 Large Edge Guard With 8 Corner Cushions - BrownMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480376

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long 2 Large Edge Guard With 8 Corner Cushions - D.BrownMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480375

Safe-O-Kid Unique High Density 2 Mtr Long U - Shaped 2 Edge Guards With 8 Corner Cushions - BrownMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480374

Safe-O-Kid Unique High Density 2 Mtr Long U Shaped Edge Guards With 8 Corner Cushions, BlackMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480373

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long 4 Edge Guard Strips- BlackMaterial: Foam Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480368

Safe-O-Kid Easy to use Baby Safety Long Pattern Edge Guard Roll 2 meter long-BlueMaterial: Rubber Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480367

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Large 4 Edge Guard Strips - D.BrownMaterial: Foam Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480366

Safe-O-Kid Unique High Density- Prevents From Head Injury Multi-Functional 2 Meter Edge Guard - BlueMaterial: Rubber Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) The Multi-Function Edge Guard comes in a roll and can be cut to fit any surface edge. It can be use as many ways. Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use:Pre -install Safe-O-Edge with Corner Cushions .First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation: Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480365

Safe-O-Kid Unique High Density- Prevents From Head Injury Multifunctional 2 Meter Edge Guard - BlackMaterial: Rubber Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) The Multi-Function Edge Guard comes in a roll and can be cut to fit any surface edge. It can be use as many ways. Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use:Pre -install Safe-O-Edge with Corner Cushions .First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation: Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480364

Safe-O-Kid Prevents From Head Injury Multi Functional 2 Meter Edge Guard, WhiteMaterial: Rubber Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) The Multi-Function Edge Guard comes in a roll and can be cut to fit any surface edge. It can be use as many ways. Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use:Pre -install Safe-O-Edge with Corner Cushions .First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation: Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480362

Safe-O-Kid Unique High Density 2 Mtr Long U - Shaped 4 Edge Guard Strips - BrownMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480360

Safe-O-Kid Unique High Density 2 Mtr Long U - Shaped 4 Edge Guard Strips - CreamMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480359

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Large Edge Guard Strips-BrownMaterial: Foam Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480358

Safe-O-Kid Unique High Density 2 Mtr Long U Shaped Edge Guard Strips - GreyMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480357

Safe-O-Kid Unique High Density 2 Mtr Long U - Shaped 4 Edge Guard Strips - BlackMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480356

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Large 4 Edge Guard Strips, BlackMaterial: Foam Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480355

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Large 4 Edge Guard StripsMaterial: Foam Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480354

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 2 Edge Guards With 8 Corner Cushions - CreamMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480352

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 2 Edge Guards With 8 Corner CushionsMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480351

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 2 Edge Guards With 8 Corner Cushions - GreenMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480350

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 2 Edge Guard With 8 Corner Cushions - GreyMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480349

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 2 Edge Guard With 8 Corner Cushions - BrownMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480348

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long 4 Medium Edge Guard StripsMaterial: Foam Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480341