Safe-O-Kid

Safe-O-Kid Easy to use Baby Safety Long Pattern Edge Guard Roll 2 meter long-BlueMaterial: Rubber Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480367

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Large 4 Edge Guard Strips - D.BrownMaterial: Foam Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480366

Safe-O-Kid Unique High Density- Prevents From Head Injury Multi-Functional 2 Meter Edge Guard - BlueMaterial: Rubber Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) The Multi-Function Edge Guard comes in a roll and can be cut to fit any surface edge. It can be use as many ways. Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use:Pre -install Safe-O-Edge with Corner Cushions .First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation: Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480365

Safe-O-Kid Unique High Density- Prevents From Head Injury Multifunctional 2 Meter Edge Guard - BlackMaterial: Rubber Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) The Multi-Function Edge Guard comes in a roll and can be cut to fit any surface edge. It can be use as many ways. Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use:Pre -install Safe-O-Edge with Corner Cushions .First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation: Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480364

Safe-O-Kid Prevents From Head Injury Multi Functional 2 Meter Edge Guard, Dark BrownMaterial: Rubber Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) The Multi-Function Edge Guard comes in a roll and can be cut to fit any surface edge. It can be use as many ways. Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use:Pre -install Safe-O-Edge with Corner Cushions .First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation: Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480363

Safe-O-Kid Prevents From Head Injury Multi Functional 2 Meter Edge Guard, WhiteMaterial: Rubber Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) The Multi-Function Edge Guard comes in a roll and can be cut to fit any surface edge. It can be use as many ways. Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use:Pre -install Safe-O-Edge with Corner Cushions .First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation: Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480362

Safe-O-Kid Unique High Density 2 Mtr Long U - Shaped 4 Edge Guard Strips - BrownMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480360

Safe-O-Kid Unique High Density 2 Mtr Long U - Shaped 4 Edge Guard Strips - CreamMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480359

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Large Edge Guard Strips-BrownMaterial: Foam Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480358

Safe-O-Kid Unique High Density 2 Mtr Long U Shaped Edge Guard Strips - GreyMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480357

Safe-O-Kid Unique High Density 2 Mtr Long U - Shaped 4 Edge Guard Strips - BlackMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480356

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Large 4 Edge Guard Strips, BlackMaterial: Foam Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480355

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Large 4 Edge Guard StripsMaterial: Foam Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480354

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 2 Edge Guards With 8 Corner Cushions - CreamMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480352

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 2 Edge Guards With 8 Corner CushionsMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480351

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 2 Edge Guards With 8 Corner Cushions - GreenMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480350

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 2 Edge Guard With 8 Corner Cushions - GreyMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480349

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 2 Edge Guard With 8 Corner Cushions - BrownMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480348

Safe-O-Kid Edge Guards 5 Mtr, Black For Kids ProtectionMaterial: Rubber Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480345

Safe-O-Kid Edge Guards 5 Mtr, Brown For Kids ProtectionMaterial: Rubber Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480342

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long 4 Medium Edge Guard StripsMaterial: Foam Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480341

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Medium Edge Guard Strips -L.BrownMaterial: Foam Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480340

Safe-O-Kid Unique High Density 2 Mtr Long U - Shaped 4 Edge Guards With 16 Corner Cushions - GreyMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480339

Safe-O-Kid Unique High Density 2 Mtr Long U - Shaped 4 Edge Guards With 16 Corner Cushions - BrownMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480338

Safe-O-Kid Unique High Density 2 Mtr Long U - Shaped 4 Edge Guards With 16 Corner Cushions - BlackMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480337

Safe-O-Kid Unique High Density 2 Mtr Long U - Shaped 4 Edge Guards With 16 Corner Cushions - D.BrownMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480335

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long 4 Large Edge Guard With 16 Corner Cushions - BlackMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480334

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Large Edge Guard With 16 Corner Cushions - BrownMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480333

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long 4 Large Edge Guard With 16 Corner Cushions (SOK9EDG2P038)Material: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480332

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long 4 Large Edge Guard With 16 Corner CushionsMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480331

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long 4 Medium Edge Guards With 16 Corner Cushions (SOK9EDG3P054)Material: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480330

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long 4 Medium Edge Guards With 16 Corner CushionsMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480329

Safe-O-Kid Unique High Density- Prevents From Head Injury Multi-Functional 2 Meter Edge Guard - Grass GreenMaterial: Rubber Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) The Multi-Function Edge Guard comes in a roll and can be cut to fit any surface edge. It can be use as many ways. Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use:Pre -install Safe-O-Edge with Corner Cushions .First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation: Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480326

Safe-O-Kid Elegant Catchy Animal Shaped Corner Guards Prevents Head Injury, WhiteMaterial: Toxic Plastic Premium Corner Cushions, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high-impact collisions (does not rupture). Safe-O-Kid's special adhesive (do not come off easily yet do not leave stains/damage furniture/paint). Non-toxic, eco-friendly, odorless, dust-free, and does not become sticky with prolonged use even in extremely hot weather. Flame retardant/fire and water resistant. Easy to install and remove. Reusable. Vast array of color and design choices to blend with furniture and/or room theme. Flexible shapes and sizes to fit all furniture types and dimensions. How to use Clean the corner surface as well as Safe-o-Kid’s Corner Cushion’s inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double-sided 3M tape provided with the Corner Cushion. Apply the tape to all four inner surfaces of corner cushion Align the tape with the edges of the Corner Cushion. Remove the 3M backings from the four pieces of tape applied to the Corner Cushion’s inner surfaces. Carefully align so the Corner Cushion fits perfectly with the corner’s surface without leaving any space. Press tightly and hold Corner Cushion against the surface for at least one minute. To Remove: - Start removing Corner Cushion carefully from any of the edges. DO NOT use any chemicals/sharp tools. - Clean the surface with a wet cloth, etc. as suitable. Best suited for: Sharp edges made of glass, metal, wood including tables, chairs, beds, drawer u,nits,fish tanks, chests/cabinets, nightstands, and shelves. Sharp edges of fixed constructions like stairs, low ceilings, plumbing fittings. Ideal places: home, schools, daycares, preschools, hospitals, assisted living facilities, senior housing, work areas, offices, museums, restaurants & hotels.Legal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480325

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 4 Edge Guard With 16 Corner Cushions - BlackMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480323

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 4 Edge Guard With 16 Corner Cushions - CreamMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480322

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 4 Edge Guard With 16 Corner Cushions - GreyMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480321

Safe-O-Kid Unique High Density L-Shaped 2 Mtr Long Mini 4 Edge Guard With 16 Corner Cushions - BrownMaterial: EVA Premium Edge guard, effectively cover the sharp edges while retaining its flexibility and softness for enhanced protection Thoroughly tested for high impact collisions (do not rupture) Best Quality Adhesives (do not come off easily yet do not leave stain/damage furniture/paint) Non-Toxic, Eco-Friendly, odorless, dust-free and does not become sticky on prolonged use even in Indian heat Flame Retardant/ Fire and water Resistance Easy to Install and Remove. Reusable. Vast Color and Design Choices to blend with furniture and/or room theme Flexible shapes and sizes to fit all furniture types and dimensions How To Use Pre -install Safe-O-Edge with Corner Cushions. First install the corner cushions on all corners and then cut the edge guard into pieces to fit the space between corner cushions. Safe-O-Edge without Corner Cushions. Mark each corner on edge guard and cut the extra material (approx. 90Deg) using sharp knife for proper fit. Installation Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. Peel off the yellow backing layer of the double sided tape provided with the edge Cushion Apply the tape to both inner surfaces of edge cushion Remove the 3M backings from the surfaces of edge cushion  Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space Press tightly and hold edge Cushion against the surface for at least one minute Optionally, apply additional designer protection layer over the edge Cushion for additional strength, life and aesthetics. To Remove: - Start Removing edge Cushion carefully from any one of the edge. DO NOT Use any chemicals/ sharp tools. - Clean the surface with wet cloth, etc as suitableLegal Disclaimer: Product color may slightly vary due to photographic lighting sources or your monitor settings.Product ID: 10480320